AUTONET TV

Fears and Gears (Signs of Automatic Transmission Problems)

Automatic transmissions rule. The old days of shifting your own gears are a thing of the past for most drivers.  But automatic transmission trouble can be a big inconvenience for any driver if it comes at the wrong time in the wrong place.  Here are some signs to look out for that may mean you are having transmission issues.

When you are driving, your vehicle seems to slip in an out of gear without you touching anything.  That's what some call, not surprisingly, a "slipping transmission." 

When your vehicle shifts from one gear to the next, you hear a loud "clunk." Transmissions are supposed to be nearly silent when they shift, so that noise is telling you something is wrong. 

If you notice there's a puddle of some fluid under your vehicle, your transmission could be leaking fluid.  Try to figure out what color it is (try putting a piece of cardboard underneath to capture some of the fluid).  If it is red or brown, that's a sign it could be transmission fluid. Sometimes you may smell the transmission fluid, too; it has what some consider a "sweet" odor.

You may have a warning light that goes on when your transmission fluid is low (it could be a special transmission symbol or simply the Check Engine light).  That light could also mean the fluid is too hot or has low pressure.

If you shift your vehicle into D (for Drive) and it doesn't move or slowly engages after some delay, you may be seeing the start of a serious problem.

Of course, you don't want a malfunctioning transmission to strand you at some inopportune time. So if your vehicle is showing any of these signs, arrange a time for a technician to check it out.  Not only are broken transmissions an inconvenience, they can be a safety hazard, too. 

Economy Transmission and Auto Repair
201 Terryville Road
Bristol, CT 06010
8605891255

Getting from E to F (Fuel Gauge Problems)

Who thinks about their fuel gauge?  You probably don't… until it doesn't work any more.  Then you have to guess how much fuel is in your tank, and that's no way to live life on the road. 

Fuel gauges, like every other part in your vehicle, can fail.  And when yours stops working, you will probably want to head over to your service facility soon, because no one relishes running out of fuel.

The fuel gauge system is much more than just the gauge you can see on your instrument panel. Most systems have a float inside the fuel tank that goes up and down depending on the fuel level.  It's called the fuel sending unit, and it sends an electrical signal to the gauge (on the dash) telling it to display how much fuel is left in the tank. 

So, what could go wrong?  Well, a few things.  For one thing, corrosion from bad fuel can cause it to stick and it won't move up and down any more.  So you could fill up your tank and the gauge would still read Empty.  If a sending unit needs to be replaced, often the parts can be costly. The good news is that fuel sending units rarely fail and most drivers will never have one go bad.

Other things that can go wrong? An electrical problem could cause a fuse to blow and you won't get a reading at all.  A technician can figure out where that electrical problem is and how to repair it.  Finally, it's possible for the gauge itself (on the instrument panel) to fail.

One thing to keep in mind is if your fuel gauge isn't working, you might be tempted to carry around an extra container of fuel.  That's ok if it's outside the cabin, such as in the bed of a pickup.  But if you carry it inside the cabin or trunk, fuel fumes can be very dangerous for your health, even fatal.

A working fuel gauge gives you peace of mind… so you'll never have that "empty" feeling.

Economy Transmission and Auto Repair
201 Terryville Road
Bristol, CT 06010
8605891255

The Flat Fix that Fits (Tire Repairs)

Can you think of anyone who likes getting a flat tire?  Of course not.  But when one of your tires winds up with a flat or leak, whether it be from things like hitting a curb, running over a nail or picking up a sharp stone, it's time to have someone who knows what they're doing take care of it.

If you're thinking you'd like to avoid having to buy a new tire, you wonder if a patch or plug will suffice.  It depends where the puncture is and how big the hole is.  Most tire experts will say if the hole in the tire is less than ¼ of an inch or 6 mm, a patch can work.  But a patch likely won't work if the compromised part of the tire is on its shoulder or sidewall.

Here's why.  The shoulder of a tire is the part between the sidewall and tread and it's usually rounded.  It's under a lot of pressure, more than even the sidewalls. And because of that curved shape, it's hard to get a patch or plug to hold.

The sidewall is the side of the tire.  Sidewalls flex a lot when you drive, and the strain can cause a patch or plug to loosen up.  A weak spot in a sidewall is much more likely to fail and cause a blowout.  So if you have damage in the sidewall or shoulder, that tire is a good candidate for replacement, not repair.

If you have a cut or gash in your tire, it's possible the cords that strengthen your tire have also been cut.  That weak spot can spell trouble, and this type of damage usually means you should get a new one.

Your service advisor can tell you what the appropriate action is to take when you have tire damage.  You may be able to get good results with a patch, or you may have to replace one or more tires.  Your safety is riding on them.

Economy Transmission and Auto Repair
201 Terryville Road
Bristol, CT 06010
8605891255

A "Mounting" Problem (Motor Mounts)

You know how heavy your engine and transmission are, so you can imagine how tough the parts that hold them onto your vehicle's sub-frame must be.  Not only must they support the weight, they also have to isolate vibrations and noise from the passenger cabin.  Pretty tall order, wouldn't you say?

The parts that face that task daily are called the motor mounts, or engine mounts.  They are usually made of rubber with steel brackets.  Others contain a liquid for vibration and sound isolation. 

Most vehicles have three or four motor mounts, and while rubber or hydraulic liquids do a good job of damping the vibrations from the engine, they also have their limitations.  The problem with rubber is that it gets old and brittle.  Plus, if there's an oil leak anywhere in your engine and oil gets on the rubber motor mounts, rubber will deteriorate even more quickly.  As for the liquid motor mounts, they can develop leaks and stop working. 

Here are signs a motor mount is going bad.  You may hear a loud clunking or banging sound under the hood.  That means the weight of the engine is shifting around enough to bang against other metal parts.  You may feel bad vibrations, and the engine may feel like it's moving around in a strange way.

When things get to that point, your vehicle can be damaged from that heavy engine knocking against things, and its time to replace one or more motor mounts.  Schedule a visit to your vehicle service facility. There, a technician will assess your motor mounts; if one bad one is found, it's not unusual that others are likely to fail soon and should be replaced before they do.

Because all vehicles are configured differently, some motor mounts are easily replaced.  But others can be much trickier, take a lot longer and therefore are more expensive to replace. 

It's important for your engine's health to make sure motor mounts are sound and solid.  You will maintain that quiet, vibration-free ride and could save your engine and transmission from major wear and tear.

Economy Transmission and Auto Repair
201 Terryville Road
Bristol, CT 06010
8605891255

Prepare Your Windshield for Winter (Wiper Blades and Fluid for Freezing Temperatures)

Winter and freezing temperatures present challenges for different parts of your vehicles.  For example, winter tires give you better traction on snow.  But some parts of your vehicle that may need special attention for winter are your windshield wipers. You may have found yourself in the middle of a snowstorm when your windshield wipers are doing nothing but streaking slush that ices up on contact on the glass.  Now you're more blind than you were before!

Obviously being able to see during a snowy or icy winter event is important for the safe operation of any vehicle.  So keeping your windshield and rear window clean can go a long way to guarantee you can see your surroundings.

Let's start with the wipers.  Blades that are good for hot weather may not be robust enough for freezing weather. You can buy special winter wiper blades that stay flexible during sub-zero temperatures.  The stiffer frames that hold them have a rubber covering that prevents ice and snow from building up.  Another style is beam wipers that have a one-piece design, intended for use all year long.  Since these have no separate frame, ice can't build up like on traditional frame wipers.  

If you've ever had salty road brine kicked up on your windshield, you know it can blind you in a second.  So you absolutely must have windshield washer fluid available to clear your vision.  The fluid you use during the warm weather months will often freeze below 32°F/0°C, and that can actually make things worse by icing up your windshield when you spray it.  Worst of all, it may freeze in your washer reservoir.

Be sure to use washer fluid that is meant for sub-freezing temperatures; special formulas will remain a liquid in weather as cold as -30°F/-34.4°C.  Some contain alcohol to keep them flowing; some have a little antifreeze that will melt snow and ice.  If you do use these liquids, make sure to keep them away from small children and pets because they're poisonous if they drink them. 

Each climate is different, and there are windshield products to meet your needs.  Your service advisor can recommend which ones will work best for you.  The idea is in winter, you need to be able to see. 

Economy Transmission and Auto Repair
201 Terryville Road
Bristol, CT 06010
8605891255