AUTONET TV

The Cable Guy (Battery Cables and Maintenance)

If you've ever noticed your vehicle's lights are dim or not working at all, the problem could be many things.  But one possibility is your battery cables aren't doing their job.  A power outage in your vehicle is similar to one in your house and needs to be repaired to get things back to normal.

Battery cables connect your vehicle's battery to the vehicle itself.  There is a positive cable when provides the power and a negative cable that connects to the vehicle chassis and provides a ground for electrical components. 

A failing battery cable may cause your vehicle not to start.  Your starter may turn over very slowly.  Or you may just hear a series of clicks.  One other clue is on your dash—the battery warning light. 

There are many things that can cause power issues in a vehicle, but it's important to keep battery cables clean and maintained.  Salt and corrosion are enemies to any power system.  A technician can keep things in top shape, disconnecting the cables, inspecting them and cleaning their ends and the battery terminals.  Cables, by the way, are often made up of smaller strands of wire.  If they are frayed, some of those smaller wires can touch metal parts of the vehicles that they shouldn't.  The result? Electrical system malfunctions.

So if you see any of these signs that something is not quite right with the power in your vehicle, consult your service advisor and get it checked out.  Feel the power!

Economy Transmission and Auto Repair
201 Terryville Road
Bristol, CT 06010
8605891255

Going (Lug) Nuts (Lug Nut Replacement)

Here's a part of your vehicle you probably don't think about much: lug nuts.  They're what fasten your wheels onto your axles.  Pretty important, right? In order to take the wheels off your vehicle to service the brakes, rotate the tires, etc., the lug nuts have to be in good shape so a wrench will grip them tightly. 

Because lug nuts are on your wheels, they are exposed to all the elements of the road (salt, water, grime) and really take a beating. Unfortunately, some manufacturers have made them out of two different metals.  Underneath is the working part of the lug nut, made of steel.  On top is the decorative (the "good looking") part, made out of chrome, stainless steel or aluminum.  After a while, the steel part begins to corrode and expands.  That changes the shape of the outer cap, sometimes rounding off the hexagonal edges and making it hard (if not impossible) to either loosen or tighten the lug nuts since the wrench won't fit any more. 

The reason that's so important is those lug nuts must be functional, especially if you find you have a flat tire somewhere on the road.  If the wheel can't come off to be swapped with a spare, it leaves few options, one of which is your vehicle may have to be towed.  All that for corroded lug nuts!

When you take your vehicle in for service, the technician who works on it keeps an eye on many things, especially if he or she is removing wheels.  It's not unusual for your service advisor to recommend you replace several lug nuts at once since some corrode at a different rate than others. Your repair facility is trying to help you avoid driving a vehicle that has wheels that can't easily be taken off when they need to be.

The good news is there are one-piece lug nuts that don't have the problem the two-piece lug nuts have, so replacing them could eliminate that from happening again any time soon.  And that's not "nuts" at all.

Economy Transmission and Auto Repair
201 Terryville Road
Bristol, CT 06010
8605891255

Objects in the Mirror (Rearview Mirror Safety and Maintenance)

You may remember a song that went, "Objects in the rearview mirror may appear closer than they are." While that was a song about life's lessons, there are a few things we should all know about how important rearview mirrors are to safe driving.

While new electronic devices are helping drivers be aware of surrounding traffic in high-tech ways, the good old rearview mirror is still a dependable way of letting you know what's around you.  There are usually 3 on each vehicle, 1 attached to the windshield inside and 2 attached outside on each of the front doors.

It's important that they be adjusted properly before you start driving (not while you're driving). Experts say the windshield rearview mirror should cover the area behind the vehicle while the outside mirrors should not simply duplicate that view but extend it to the sides, where blind spots normally are.

Your rearview mirrors must be able to hold the positions they're adjusted in; it there's play in them or they move around, you'll never be sure they're pointed in the direction that will let you see where traffic is.  The one on the windshield must be firmly attached.  If it won't stay where you want it, head to your service facility where they can tighten it or replace any parts necessary to let the mirror maintain its aim. If it has fallen off the windshield completely, a technician can reattach it with the proper adhesives or fasteners.  There may be electronics that need to be properly connected as well.

The outside mirrors cover your blind spots and they must be able to hold their adjustments, too.  Many adjust electronically; switches and motors can fail, electrical connections can detach or become corroded and the reflective glass can crack, discolor or develop a hazy fog.  A technician can diagnose and repair those problems and recommend any replacement parts you might need.  Mirrors that are adjusted manually also should be restored to proper working order in order for you to maintain this important rear visibility.

Drivers don't think about their rearview mirrors all that much.  On reflection, don't they deserve respect and care for the important job they do?

Economy Transmission and Auto Repair
201 Terryville Road
Bristol, CT 06010
8605891255

Straight Ahead (Wheel Alignment)

If every road was straight and smooth, we wouldn't have to worry much about wheel alignment. But they're not, so we do.  Hitting potholes or driving on rough pavement can knock your vehicle out of alignment and you'll notice it in one of several ways.

Your steering wheel may not be centered when you're driving straight ahead, or your vehicle may pull to one side.  You may find your tires wearing on one side or they may squeal.  All are signs that could point to you needing an alignment.

Your wheels should be perpendicular to the road and parallel with each other.  If not, your tires will wear out faster and your vehicle won't go straight on a level straightaway.

In alignment, there are several factors that must be checked.  One is camber.  Your wheels should be straight up and down if you look at them from the front. If not, you'll wear your tires unevenly on one side.

Another factor is caster, the angle of the steering pivot.  Most vehicles have what's called positive caster, when the top of the steering pivot leans toward the rear.  Proper caster balances steering effort, stability on the highway and cornering.

You may have heard the term "toe" in reference to your wheels.  If you looked at your front wheels from straight above, for example, imagine your wheels were your feet.  If you were to turn your toes in toward each other, that would be toeing in.  The toe of your vehicle should be set to manufacturer's specifications so your vehicle handles well and doesn't prematurely wear out tires.

It's a good idea to have your alignment checked periodically since it can get knocked out by one hard knock or a lot of little knocks.  It's not just about tire wear, it's about ride comfort and safe handling. You may say a vehicle aligned just feels divine.

Economy Transmission and Auto Repair
201 Terryville Road
Bristol, CT 06010
8605891255